Description
EV350M is a fully electric powered VTOL UAV that equipped with professional 5-lens oblique camera, specially designed for the purpose of 3D modeling, oblique mapping and ground survey. The 5-lens oblique camera helps to build detailed, centimeter-accurate geo-referenced maps, providing a real-world view, helping rapid decision-making and analysis of how a project is progressing.
It is a safer and easier way of gathering data by using EV350M. No longer do you need to have staff walking over dangerous terrain or working at height – the EV350M can do it for you. EV350M is built based on EV350 which features a highly advanced aerodynamic design. With the built-in camera, it is able to fly about 165 minutes per flight.
Except the professional 5-lens oblique camera, EV350M comes with a built-in Lidar range sensor. It provides accurate and fast altitude (AGL) measuring capabilities, also helps with automated landings, precise hovering, and terrain following.
We use the advanced MS8014 180kv Position Locking motors which developed together by T-motor and Mugin UAV. These motors are squeezing some higher thrust ratings at lower throttle and have another not so hidden secret that they can stop the VTOL propellers parellel to the booms while cruising.
Every part has been installed and tested, including the autopilot, GPS, RTK, Lidar sensor and mapping camera. No need to spend too much time on the build and tuning.
The data can be processed through drone mapping software to create a range of assets, such as 3D models, 2D maps, and digital elevation models, which can be used to extract valuable information like highly-accurate measurements and volumetric calculations.
Features of EV350M 5-Lens Oblique Camera
2. Large storage: centralized storage, with a total storage capacity of 1.2T.
3. Intelligent interaction: Automatically complete the five-view self-check after booting. Equipped with independent high-definition screen displays.
4. Real-time view camera ID, number of photos, camera status, formatting, resetting, and adjusting camera shutter functions through buttons and ground station.
5. High imaging quality and high stability: 16-bit image processing technology, clear & transparent images, nearly no distortion. Very low imaging noise even under dark light conditions.
6. High-precision model: clear details and good sense of hierarchy. PPK information feedback reception shortens the delay by about 5ms, and it has higher synchronization.
Data Collection Speed
This number varies depending on factors such as overlap and altitude. The model takes into account data collection only.
Specifications of EV350M 5-Lens Oblique Camera
1. Weight: ≤780g
2. CMOS size: 23.5mmX15.6mm
3. Number of cameras: 5
4. Exposure mode: fixed distance / fixed point exposure
5. Effective pixels: ≥120 million
6. Lens focal length: 35mm*5
7. Maximum working humidity: 95% (no condensation)
8. The tilt angle of the squint lens: 45°
9. Work temperature: -30-50℃
Every part has been installed and tested, including the autopilot, GPS, RTK, Lidar sensor and mapping camera. We know well how expensive and how important the camera is, therefore we have made a special frame inside to hold the camera, make it safe and protect it from the collision. Plug and play, the camera starts to work.
Your Purchase Includes:
EV350 VTOL UAV Platform x 1
T-motor MS8014 KV180 VTOL Motors x 4
T-motor Flame 80A HV ESC x 4
T-motor 24″*7.2″ VTOL Propeller x 4
Falcon C2E 21″*10″ Pusher Propeller x 1
T-motor AT7251 Pusher Motor x 1
T-motor Flame 100A ESC x 1
Savox SV-1250MG Servo x 2
Savox SC-1256TG Servo x 2
Savox SH-0263MG Servo x 2
Mugin LED Navigation Light x 1 set
5-Lens Oblique Mapping Camera x 1
LightWare SF11 100m LIDAR Range Sensor x 1
AT23D Dynamic Long UAV Pitot Tube x 1
CUAV V5+ ( or Pixhawk Cube Orange) Autopilot x 1
Neo 3 (or Here 3) GPS x 1
Build Kit x 1
Aluminum Transport Case x 1
Assembling x 1
Tuning and Flight Test x 1 (Test VTOL functions only)
*Due to the limit of air regulation, we are not able to conduct complete flight test. Only VTOL functions will be tested. However, the PID param files will be provided.
*The items listed above might have a slight change due to the change of stock availability without prior notification, but the main parts will remain the same and keep the same performance.